Rust Proof Galfan Coated Welded Gabion Boxes In South Africa
SHUXIN Gabions is your reliable supplier of welded-wire gabion
baskets, suited for both commercial and residential applications.
Our Wire Mesh is zinc coated after welding, providing a superior
quality that will protect the welds from corrosion and other
outside elements.Gabions made of welded-wire offer greater strength
then woven wire gabions, and still possess the same flexibility.
Details of welded gabion box :
- Material of welded gabion box:Galvanized wire
- Surface treatment:Electric galvanized.hot dipped galvanized,pvc
coated
- Connect way of gabion box :by Helical wire,by U post,H post
- Packages:with pallet or as your request.
| Nominal Box sizes ( m) | No. of diaphragms (no.) | Capacity per box (m3) |
| 1.0 × 1.0 × 0.5 | Nil | 0.50 |
| 1.0 × 1.0 × 1.0 | Nil | 1.00 |
| 1.5 × 1.0 × 1.0 | Nil | 1.50 |
| 2.0 × 1.0 × 0.5 | 1 | 1.00 |
| 2.0 × 1.0 × 1.0 | 1 | 2.00 |
| 3.0 × 1.0 × 0.5 | 2 | 1.50 |
| 3.0 × 1.0 × 1.0 | 2 | 3.00 |
| 4.0 × 1.0 × 0.5 | 3 | 2.00 |
| 4.0 × 1.0 × 1.0 | 3 | 4.00 |
Welded gabion box advantages:
- Blends easily and harmoniously with the natural surroundings.
- Low cost alternative to concrete or masonry structures.
- Very high resistance to natural forces due to better tensile
strength.
- Can withstand any unpredictable movement or settlement without loss
of stability.
- Simple and speedy installation, making it cost effective.
- Quality finish and appearance is more aesthetically pleasing.
- More rigid than woven mesh resulting in a more uniform finish when
built.
- Quicker and cheaper to install than Woven Mesh gabions because no
pre-stretching required.
- Special gabions sizes and mesh such as gabions with 4mm front mesh
and 3mm mesh else can be available.
How to install welded gabion box?
Step 1. Ends, diaphragms, front and back panels are placed upright on the
bottom section of wire mesh.
Step 2. Secure panels by screwing spiral binders through the mesh openings
in adjacent panels.
Step 3. Stiffeners shall be placed across the corners, at 300mm from the
corner. Providing a diagonal bracing, and crimped over the
line and cross wires on the front and side faces. None are needed
in interior cells.
Step 4. Gabion box filled with graded stone by hand or with a shovel.
Step 5. After filling, close the lid and secure with spiral binders at the
diaphragms, ends, front and back.
Step 6. When stacking tiers of the welded gabion box, the lid of the lower
tier may serve as the base of the upper tier. Secure with
spiral binders and add pre-formed stiffeners to exterior cells
before filling with graded stones.
