Galvanized Steel Tank Barrier Net Wound Tank Tracks Plain Weave
Wire Mesh Custom Carbon Steel Russia
Recently, our factory produced a new type of steel wire mesh named
" Anti Tank Barrier", from its name, we know its usage to stop tank
moving during war. How it works, please see the following
information, and contact us.
The common size of Anti Tank Barrier Mesh is 10*10*1.4m and
10*5*1.4m, the wire thickness is from 0.5 till 0.8mm. it is
Three-dimensional steel wire mesh. when it open, the thinner steel
wire make this kind of mesh is difficult to find.
Inconspicuous obstacle (inconspicuous wire net, MZP, MZP putanka,
putanka ) - a three-dimensional barrier made of carbon wire rings.
The wire is very thin, so it is almost invisible. Refers to
engineering non-explosive containment barriers.
Detailed information
The wire ring connection will form a four-layer space grid with a
height of 1.4 meters, a length of 10 meters and a width of 10
meters. The kit consists of 40 connecting rings with a diameter of
0.8 mm annealing wire manufactured as standard GOST 3282-74 and 40
metal posts (25 cm long). The folding size is 1.2 x 0.6K 0.12m.
| Product name | Anti-Tank Barrier Netting |
| Size | 10*10*1.3 M |
| Brand name | Hebei KN |
| Weight | 24KG each pc |
| Material | Annealed steel wire |
Production process
Secure the start of the 0.9 mm wire to one of the tubes at the
start of a row.Lay a row of ramps in the correct direction, then
return in the opposite direction following the pattern of laying
the ramps to close the row of ramps.
Installation
Secure the start of the 0.9 mm wire to one of the tubes at the
start of a row.Lay a row of ramps in the correct direction, then
return in the opposite direction following the pattern of laying
the ramps to close the row of ramps. Rewind the start of the wire
secured to the tube (secured by winding) onto the last turn of the
closed ramp. Do not cut the wire at the end of the row! Each row is
braided with a single wire along all 20 layers!
1.Stretch two rows of coils to their full length
2.Lay out each row outward
3.Two rows should make four
4.To fix the coil with nails, you need to fix it with a thick coil
with nails
5.Hold on to the propeller and move the wire sufficiently as shown
in the picture.6.By this move and stretch the bottom it will shows thick lines,
thin lines will extend upward,after fix the outermost layer of
coils.
What happens when you hit an inconspicuous obstacle?
If a person tries to go through into the territory, he gets
confused in it. There is no way to get out of the confusion without outside help. Therefore, the offender remains safely waiting for
the guard on the spot. When an armored vehicle or tank passes, the
vehicle wraps around the wheels and turns into a pile of metal on
the chassis, preventing it from moving further. And it’s difficult
to remove such a gift from the wheels.
